Updated January 2019

• Aquarius Std S20 S63 Driver Download For Windows 10 64
• Aquarius Std S20 S63 Driver Download For Windows 10

Download Aquarius2Go Astrology for PC free at BrowserCam. Developed and designed Aquarius2Go Astrology undefined to work with Google's Android and also iOS however you might also install Aquarius2Go Astrology on PC or laptop. Have you ever wondered how can I download Aquarius2Go Astrology PC? Don't worry, we are able to break it down on your behalf into simple. I just purchased a refurbished Z820 workstation. However, I can't get the onboard LSI SAS 2308 controller to run. Windows 10 has no drivers for it, and neither does HP. I have searched in vain trying to find drivers, but no luck. Since Microsoft is phasing out support for Windows 7. Paragon Driver for Windows. (My) Computer or Windows/File Explorer until this software is installed. Connect the Seagate external “for Mac” drive to the Windows computer. The drive must be connected to the computer during installation or the install will not complete. Download the file HFS4WIN.exe to your. Download Aquarius laptop and netbook drivers or install DriverPack Solution for automatic driver update. Windows XP, 7, 8, 8.1, 10 (x64, x86) Category: Laptops.

Hollywood.com, LLC (“Hollywood.com” or “we”) knows that you care how information about you is used and shared, and we appreciate your trust that we will do so carefully and sensibly. Hollywood.com strives to respect and protect the privacy of individuals that visit our websites. This notice constitutes our Privacy Policy.

By using our services, you expressly consent to this Privacy Policy and our Terms of Use, including our use and disclosure of your personal information in the manner described in this Privacy Policy. This Privacy Policy is incorporated into and subject to our Terms of Use.

No Hollywood.com services, including the Hollywood.com website and its subdomains, are directed to children under 13. Federal law requires that Hollywood.com may not collect any personally identifiable information from persons under 13 years of age. If you are under 13 years of age, you may not register for any Hollywood.com services or provide any of your personal information to Hollywood.com.

This Privacy Policy applies to the all of the websites and services of Hollywood.com and all of its subdomains.

What Information We Collect and For What Purposes

To most effectively offer our services, we may collect information from you in the following ways:

– Information You Provide to Register. If you wish to register for the Hollywood.com newsletter or to participate in a contest or giveaway, we request you to provide your email address and zip code (or foreign postal area). You may also include any additional information in a space provided. You are not required to provide this information, but then you may not receive the services.

– Server Log Information. Our servers automatically log certain basic technical information when a user accesses the website, which may include your Internet Protocol (IP) address, your browser’s request to the Hollywood.com server, the date and time of the request, the language and type of browser you use, certain mobile device information, the referring web page, your computer or mobile device operating system, and any Hollywood.com cookies associated with your browser.

– Communications From You to Us. If you send correspondence or email to us or otherwise communicate with us, we may retain copies of the communications to assist you or for our records.

– Cookies. When you browse to www.hollywood.com, our system sends a small file called a “cookie” to your computer that identifies your browser. This allows us to recognize you for purposes of saving your preferences or providing personalized service. We use cookies to record session information, to record user-specific information on what pages users access or visit, or to customize Web page content based on visitors’ browser type or other information that the visitor sends. Since we use cookies to make your website visit more user friendly, please be aware that refusing cookies may not allow you to take full advantage of some our website features. We also use third-party analytical services such as Google Analytics and those services may use cookies to collect information regarding users that is not personally identifiable. If you enable a Do Not Track (“DNT”) setting in your browser, we will not set cookies.

– Social Networking. We allow you to sign into social networking and other online profiles through Hollywood.com so you can interact with our services using those accounts. Hollywood.com can only recognize you through these accounts if you specifically agree to share that information by signing in.

– Demographic Data. We may access information about you from third-party sources and platforms (such as databases, online marketing firms, and ad targeting firms) including your age range, gender, location, and interests.

The only purposes for which Hollywood.com processes personal information are those stated in this Privacy Policy, including the above, and the following purposes:

– To assist the technical support of our system

– To maintain and improve the quality of our services through auditing, research and analysis

– To develop new services or enhance existing service.

– To communicate with you or respond to a request.

– To better understand, market to and serve our users.

– To protect the rights of property or safety of Hollywood.com or its members.

– To run contests or giveaways. We may run contests on our sites in which we ask visitors for contact information (such as their name and email address) and demographic information (such as their zip code or foreign postal area). The user’s contact information is used to contact the user when necessary, such as if they win a contest or to notify users of upcoming contests.

Information You Reveal to Hollywood.com or Publish or Post is Public

Any information you contribute as a “comment” to an article or feature on Hollywood.com is public. Once you post information as a “comment,” Hollywood.com does not prevent others from reviewing it.

NOTICE: CALIFORNIA MINORS (CALIFORNIA RESIDENTS UNDER AGE 18)

If you are a California resident under age 18 you may request Hollywood.com to remove comments previously posted by you from public view on Hollywood.com. If you’d like to request removal of a comment, please email membership@hollywood.com with the following information: the URL where the content exists and the exact content you would like to remove. Please include “request for removal” in the subject of the email.

Where Information is Processed

Hollywood.com processes personal information on the secure servers of a hosting service located in the United States of America.

Sharing of Information

Hollywood.com will not share your personal information with third parties unless:

– You give consent.

– The information is shared on a need-to-know basis with a person or company engaged as our agent to perform, or contribute to, our services, provided such person or company complies with this Privacy Policy. The information is shared on a need-to-know basis with a person or company engaged as our agent to perform, or contribute to, our services, provided such person or company complies with this Privacy Policy. In the case of contests or giveaways that you participate in, we may share information with a third party who runs the contest, or for shipping purposes.

– We believe in good faith that use or disclosure of the information is reasonably necessary to: (1) detect or prevent fraud or security issues; (2) comply with any law, regulation, legal process or government order; (3) protect the rights of property or safety of Hollywood.com or its members; or (4) to enforce Hollywood.com’s website policies or investigate potential violations thereof.

Use of Non-Personal Information

Hollywood.com may share with third parties certain pieces of aggregated demographic data that will not identify you or anyone personally, such as the number of users who viewed a particular page in a given time-period, or geographic statistics about our members.

Ads appearing on this website are displayed on your screen by either (a) one of our web advertising partners or (b) by us. Information about your visit to this site, such as the number of times you have viewed an ad, your browser, the type of computer operating system you use, and whether or not you responded to the ad delivered, (but not your name, address, phone number or other personally identifying information), is used to serve advertisements to your screen. We may use your zip code or geographical location information to serve appropriate advertisements. In the course of serving advertisements to this site, our third party advertiser may place or recognize a unique cookie on your browser.

We may also use third party advertisements placed by ad networks to support our Site. Some of these advertisers and ad networks may use your zip code or geographic location and technology including, but not limited to, cookies or web beacons when they advertise on our Site. These advertisers and ad networks may collect and use the non-personal information described above to provide you with relevant advertisements based on your online behavior, activities on our Site and other third party sites, demographic information, or information relevant to your general location so that the advertising you see on our Site more closely reflects your interests. If you would like more information about this practice or to opt-out of this type of advertising, please click here.

Information Security

Aquarius Std S20 S63 Driver Download For Windows 10 64

Any of your personal information that is stored is kept securely on servers maintained by Hollywood.com’s hosting provider Industry-standard encryption technologies are used when transferring and receiving consumer data exchanged with our site, which encrypts information you input, except for domain name data.

You are solely responsible for the confidentiality of your password, if any. We suggest you do not share your password with anyone.

Unfortunately, no data transmission over the Internet or any wireless network can be guaranteed to be 100% secure. As a result, while we strive to protect your personal information, Hollywood.com cannot ensure or warrant the security of any information you transmit to us or from our online products or services, and you do so at your own risk.

Leaving Hollywood.com

By clicking on any outbound links or advertisements on Hollywood.com, you are leaving the Hollywood.com website, and any transfers of information between your computer and the non-Hollywood.com website or service you navigate to are not subject to this Privacy Policy.

Mergers or Acquisitions

If Hollywood.com becomes involved in a merger, acquisition, or other sale of its assets, we will ensure the confidentiality of any personal information involved in the transactions and notify you before the information is transferred or becomes subject to a different privacy policy.

Accessing or Updating Your Information

Our site also provides users the opportunity to decline to receive communications from us and our partners at the point where we request information about the visitor.

To correct, update, or remove information from our records and databases, or to unsubscribe from services, users have the following options:

– Users may send a request by email to membership@hollywood.com

– Users may unsubscribe to the Hollywood.com newsletter via the link within it (each time it is sent), or by sending email to the above email address or U.S. mail to the below address.

– Users may send mail to the following postal address: Membership Information, Hollywood.com, LLC, 447 Broadway, 2nd FL #524, New York, NY 10013. All requests for personal data modifications are acted upon in the ordinary course of business, and Hollywood.com reserves the right to retain backup copies of such requests.

California Residents

It is not Hollywood.com’s practice to disclose your personal information to any third parties that use your information for direct marketing purposes. However, as required by California law, upon letter or email request by any California resident with whom Hollywood.com has an established business relationship, Hollywood.com will disclose to you each instance, if any, in the immediately preceding calendar year in which Hollywood.com disclosed your personal information to a third party that Hollywood.com knows or has reason to know used your personal information for direct marketing purposes. See California Civil Code § 1798.83.

Please address such requests to:

California Privacy Matters, Hollywood.com, LLC, 447 Broadway, 2nd FL #524, New York, NY 10013

Changes to this Privacy Policy

This Privacy Policy may change from time to time. Please check here for the most recent update.

Choice / Opt-Out

Users of our site may opt out of their information being (1) disclosed to third parties; or (2) used for a purpose that is incompatible with the purpose(s) for which it was originally collected or subsequently authorized by a user. To opt-out, please submit your request to membership@hollywood.com

Sensitive personal information will never be disclosed to third parties or used for a purpose that is incompatible with the purpose(s) for which it was originally collected or subsequently authorized by a user, unless you expressly grant permission for the use.

Third Party Collection of Information

Certain third parties including, but not limited to, Facebook, whose pixels or data are used by our website, may use cookies, web beacons, and similar technologies to collect or receive information from your website, and elsewhere on the internet, and use that information to provide measurement services and target ads. You can opt-out of the collection and use of your information for ad targeting by accessing www.aboutads.info/choices and following the opt-out instructions contained there.

Nielsen Digital Measurement and Your Right to Opt-Out

This site includes Nielsen proprietary measurement software, which will allow you to contribute to market research, such as Nielsen TV Ratings. To learn more about the information that Nielsen software may collect and your choices to opt out with respect to it, please see the Nielsen Digital Measurement Privacy Policy at http://www.nielsen.com/digitalprivacy.

Safe Harbor Framework Notice

Hollywood.com, LLC complies with the U.S.-EU Safe Harbor Framework and the U.S.-Swiss Safe Harbor Framework as set forth by the U.S. Department of Commerce regarding the collection, use, and retention of personal information from European Union member countries and Switzerland. Hollywood.com, LLC has certified that it adheres to the Safe Harbor Privacy Principles of notice, choice, onward transfer, security, data integrity, access, and enforcement. To learn more about the Safe Harbor program, and to view Hollywood.com, LLC’s certification, please visit http://export.gov/safeharbor/. The company’s privacy policies are set forth at http://www.hollywood.com/privacy.

Recourse Mechanisms. If you have any complaints regarding the compliance of Hollywood.com, LLC with the Safe Harbor Framework, you may direct your complaint to our compliance representative:

Greg Sica
Hollywood.com, LLC
2255 Glades Road, Suite 221A
Boca Raton, FL 33431
safeharbor@hollywood.com

If you are unable to resolve any such complaints by dealing with our compliance representative, Hollywood.com, LLC agrees to arbitrate such unresolved complaints through JAMS at its Los Angeles, or Miami offices (www.jamsadr.com) pursuant to its JAMS Policy on Consumer Arbitrations Pursuant to Pre-Dispute Clauses. No complaint may be brought to JAMS for arbitration until ten days have elapsed from the rejection of your claim by our compliance representative.

Questions

If you have any questions about this privacy statement, the practices of this site, or your dealings with this website, you can contact:

Privacy Matters
Hollywood.com, LLC
2255 Glades Road, Suite 221A
Boca Raton, FL 33431

or email us at membership@hollywood.com

This page describes and explains the Repetrel software. To download and install the software, please see the Downloads page.

Repetrel is the name of our proprietary software which runs our equipment. It is based on an older, publicly available version of Repetier Host.

Versions

Repetrel version 5.x should be available in summer 2021.

Repetrel version 4.x was first released in August 2019; the final 4.x release should be available in spring 2020.

Repetrel version 3.x was first released in November 2017; the final 3.x release is from March 2019.

Repetrel version 2.x was first released in July 2015; the final 2.x release is from July 2016.

Repetrel version 1.x was first released in July 2014; the final 1.x release is from September 2014.

Repetrel version A33 was released in 2013.

Interface

The Repetrel interface is divided into three main sections: the Top Menu Area, the Left Side Area, and the Right Side Area:

These are explained in detail in the subsequent sections:

Top Menu Area

The content of the Top Menu Area is constant and always visible, and has the following buttons/menus:

File

The File menu (shown to the right) has the following options:

• Open Project will open a HyProj (Hyrel Project) on a blank build area, including multiple elements as scaled/rotated/positioned.
• Add Project will add another HyProj to the current build area.
• Save Project will save all elements as displayed as a HyProj.
• Save Project As will save the HyProj as displayed with a name and location of your choosing.
• Import has the following submenu options:
  • Slic3r, Default Recipes has the following submenu options:
    • All Recipes will import All of our Slic3r recipes into their default locations, overwriting anything with the same names.
    • All Print Recipes will import our Print recipes into their default locations, overwriting anything with the same names.
    • All Printer Recipes will import our Printer recipes into their default locations, overwriting anything with the same names.
    • All Filament Recipes will import our Filament recipes into their default locations, overwriting anything with the same names.
  • STEP IGES FILE will allow you to designate a single STEP or IGES file to be loaded to be processed to generate GCODE.
• Export will export the STL file(s) and save them to disk.
• Zip and Send To USB has the following submenu options - all written to the first USB drive detected:
  • REPETREL will unfortunately create an empty .rar file.
  • SLIC3R wil make a .rar file of your slic3r program folder.
  • Slic3r Recipes will make separate .rar files of your Printer, Print, and Filament recipe diretories.
  • Screen Shot will save a capture of the Repetrel screen (with no filename extension - just 'ScreenShot', but Paint will open it).
  • Project with Source Files will currently do nothing (v4.001_A).
  • Screen Shot To Project Folder will currently do nothing (v4.001_A).
  • Project GCODE will only work if you've opened a 'Job' file.
• Email has the following submenu options; they only work if you've configured Repetrel with your email credentials.
  • Slic3r Settings
  • Project
  • Contact Manager
  • Screen Shot
• Open Folder Browser has the following submenu options:
  • Last Part GCODE Folder will open the directory from which the last GCODE file was opened.
  • Last Part STL Folder will open the directory from which the last STL file was opened.
  • Repetrel/Bin will open the C:repetrelbin directory.
  • Default Network Location will open your default network location.
  • Slic3r Recipes has the following submenu options:
    • Print Recipes will open C:UsersHyrelAppDataRoamingSlic3rprint.
    • Printer Recipes will open C:UsersHyrelAppDataRoamingSlic3rprinter.
    • Filament Recipes will open C:UsersHyrelAppDataRoamingSlic3rfilament.
• Update Firmware has the following submenu options:
  • HotHead Controller will launch the application to flash new firmware on your 103 hothead/hotbed controllers.
  • 407 Motion Controller will launch the application to flash new firmware on your 407 motion controller.
• Exit will close and exit the Repetrel program.
• open media file will open a folder browser to open .wmv files.

Print

The Print button will cause the printer to commence executing the first GCODE file in your tree view.

Kill job

The Kill job button will cause the printer to cancel the GCODE currently running.

Functions

The Functions menu (shown to the right) has the following options:

• Manual Control will bring the Control Tab to the foreground of the Left Side Area.
• UNLOCK MOTORS will disengage (unlock) the motors controlling X, Y and Z positioning, allowing for manual movement.
• Home XY Motors will send the following commands:
  • G28 X0 Y0 - this sends the X and Y to the home position;
  • G92 X0 Y0 - this resets the home location to the current position; and
  • G0 X0 Y0 - this tells the X and Y to move to the home position (where they already are).
• Home Z Axis does nothing at present.
• Send Z to Zero will send a G0 Z0 command, sending the bed and/or yoke in the Z axis to the programmed Z position.
• M7 Turn on AUX OUTPUT will send an immediate M7 command to energize the Aux Output 1 connection (mist on CNC).
• M8 Turn On Aux Output 2 will send an immediate M8 command to energize the Aux Output 2 connection (flood on CNC).
• M9 Turn OFF Aux OUTPUTS will send an immediate M9 command to de-energize both Aux Output connections.
• DUMP CRASH DATA will send M777 S1 to the printer, and should make a data dump helpful for diagnosing troubles.

Light

The Light menu (shown to the right) has the following options for the X-Arm (ESR, EHR, 30M) or Gantry (Hydra 16A) printers. Please note that not all of these features (or axes) are available on all models:

• Light On will send an M672 S01 command, turning on the light.
• Light Off will send an M670 S00 command, turning off the light.
• X Home will send an M672 S10 command, so the light toggles when the X axis Home sensor is tripped. It ALSO has a sub-menu:
  • X Limit1 will send an M670 S11 command, so the light toggles when the X axis Limit1 is reached.
  • X Limit2 will send an M670 S12 command, so the light toggles when the X axis Limit2 is reached.
  • X STALL will send an M670 S13 command, so the light toggles when the X motion is stalled.
  • X Drv Err will send an M670 S14 command, so the light toggles when the X driver has an error.
• Y Home will send an M672 S20 command, so the light toggles when the Y axis Home sensor is tripped. It ALSO has a sub-menu:
  • Y Limit1 will send an M670 S21 command, so the light toggles when the Y axis Limit1 is reached.
  • Y Limit2 will send an M670 S22 command, so the light toggles when the Y axis Limit2 is reached.
  • Y STALL will send an M670 S23 command, so the light toggles when the Y motion is stalled.
  • Y Drv Err will send an M670 S24 command, so the light toggles when the Y driver has an error.
• Z Home will send an M672 S30 command, so the light toggles when the Z axis Home sensor is tripped. It ALSO has a sub-menu:
  • Z Limit1 will send an M670 S31 command, so the light toggles when the Z axis Limit1 is reached.
  • Z Limit2 will send an M670 S32 command, so the light toggles when the Z axis Limit2 is reached.
  • Z STALL will send an M670 S33 command, so the light toggles when the Z motion is stalled.
  • Z Drv Err will send an M670 S34 command, so the light toggles when the Z driver has an error.
• A Home will send an M672 S40 command, so the light toggles when the A axis Home sensor is tripped. It ALSO has a sub-menu:
  • A Limit1 will send an M670 S41 command, so the light toggles when the A axis Limit1 is reached.
  • A Limit2 will send an M670 S42 command, so the light toggles when the A axis Limit2 is reached.
  • A STALL will send an M670 S43 command, so the light toggles when the A motion is stalled.
  • A Drv Err will send an M670 S44 command, so the light toggles when the A driver has an error.
• B Home will send an M672 S50 command, so the light toggles when the B axis Home sensor is tripped. It BLSO has a sub-menu:
  • B Limit1 will send an M670 S51 command, so the light toggles when the B axis Limit1 is reached.
  • B Limit2 will send an M670 S52 command, so the light toggles when the B axis Limit2 is reached.
  • B STALL will send an M670 S53 command, so the light toggles when the B motion is stalled.
  • B Drv Err will send an M670 S54 command, so the light toggles when the B driver has an error.
• C Home will send an M672 S60 command, so the light toggles when the C axis Home sensor is tripped. It ALSO has a sub-menu:
  • C Limit1 will send an M670 S61 command, so the light toggles when the C axis Limit1 is reached.
  • C Limit2 will send an M670 S62 command, so the light toggles when the C axis Limit2 is reached.
  • C STALL will send an M670 S63 command, so the light toggles when the C motion is stalled.
  • C Drv Err will send an M670 S64 command, so the light toggles when the C driver has an error.
  • Output 1 will send an M672 S71 command (under development).
  • Output 2 will send an M672 S72 command (under development).
  • Output 3 will send an M672 S73 command (under development).
  • Output 4 will send an M672 S74 command (under development).
  • Output 5 will send an M672 S75 command (under development).
  • Output 6 will send an M672 S76 command (under development).
  • Output 7 will send an M672 S77 command (under development).
  • Output 8 will send an M672 S78 command (under development).
• M8 State (under development)
• E State will toggle the light when executing extrusion moves. Sorry.
• Input State (under development) It ALSO has a sub-menu:
  • Input 1 will send an M672 S71 command (under development).
  • Input 2 will send an M672 S72 command (under development).
  • Input 3 will send an M672 S73 command (under development).
  • Input 4 will send an M672 S74 command (under development).
  • Input 5 will send an M672 S75 command (under development).
  • Input 6 will send an M672 S76 command (under development).
  • Input 7 will send an M672 S77 command (under development).
  • Input 8 will send an M672 S78 command (under development).
• Assign To Output (under development) It ALSO has a sub-menu:
  • HSS 1 (M7) will send an M672 O0 command (under development).
  • HSS 2 (M8) will send an M672 O1) command (under development).
  • HSS 3 will send an M672 O2 command (under development).
  • HSS 4 will send an M672 O3 command (under development).
  • HSS 5 will send an M672 O4 command (under development).
  • HSS 6 will send an M672 O5 command (under development).

Settings

The Settings menu (shown to the right) has the following options:

• Printer will launch the Printer Settings configuration tool, which has three tabs:
  • The Printer tab allows for configuration of G0 Rapid Movement Rates, Park parameters, Home Parameters, and Actions after Job Kill.
  • The Printer Shape tab allows for configuration of Print Area, Travel Limits, Dump Area, and Custom Pulses per Millimeter settings in each axis. Most users should NEVER change these settings.
  • The Advanced tab has options for post-slicing filters.
• Slicer Settings will actually launch the Slic3r homepage in the Web Browser tab.
• Config has the following options:
  • Language has options for various languages.
  • Set Working Bin Directory will allow you to select a different working directory. Use with caution.
  • Repetrel general configuration allows for a few configuration changes.
  • Sound Configuration allows for audio notifications of certain events.
  • FTP allows for storage of a default FTP credentials.
• Repetrel displays the version of Repetrel which you are currently using. The Repetrel Updates option is not presently working.
• Email Settings allows for storage of a default email credentials.
• Change Border Style toggles display of a window border, allowing for resizing and repositioning. Note that with the border displayed, some portions of the Repetrel interface may not be displayed.

Help

The HELP menu (shown to the right) has the following options:

• PDF tutorials has the following options:
  • 1. Hyrel_Quickstart gives a quick overview of unpacking, setting up, and printing.
  • 2. Hyrel_Intro_EMO gives a review of the first training session, including printing with the EMO-25.
  • 3. Hyrel_MK1_Single gives a review of the second training session, including printing with the MK1-250.
  • 4. Hyrel_MK1_Multiple gives a review of the advanced training session, including parallel (clone) and series (cooperative) printing with multiple heads.
• Video Tutorials does nothing at present.
• Maintenance Video does nothing at present.
• Accessory Manuals has the following options:
  • Drill Mill Head Manual explains the ST1 Spindle Tool.
  • EMO 25 Manual explains the EMO-25 print head.
  • HotHead Controller Schematic - 102081_1 explains the 103 Controller Board.
  • HotHead SDK explains the Software Developer's Kit for print heads.
  • MK1 250 Manual explains the MK1-250 print head.
  • Shark V Laser Manual explains the modular laser heads.

Power Indicator, Clock

The Power Indicator shows battery charge / AC power. The Clock shows the current time.

ALARM

The ALARM button will actually force Repetrel to the background, enabling viewing of other windows.

RESET

The RESET button will initiate a soft reset of the 407 Motion Controller.

Left Side Area

The content of the Left Side Area is dynamic, changing depending on which of the Left Side Tabs you have selected:

3D View

The 3D View tab (shown to the right) displays a rendering of the build area above a log of selected messages. The icons to the right allow one to:

• Rotate the view
• Move Viewpoint (or pan) the view
• Move Camera on the view
• Move Object (or drag the object)
• Zoom the view
• Change 'Orientation of the view to:
  • ORTHO View - looking from the front and above
  • TOP View - looking from above, centered
  • Front View - looking from the front, centered
  • Back View - looking from the back, centered
  • Side View - should be looking from the side; as of 8/22/2016, looking from the top, centered.
  • Bottom View - looking from the bottom, centered
• Use Parallel Projection
• CSG has options for:
  • Merge - this will combine two STL files into a single STL as positioned.
  • Subtract - this will evacuate the area of one STL from another as positioned.
  • Intersection - this will generate a new STL where two others intersect as positioned.
  • Mirror - no apparent function as of 8/22/2016
• Grid Snap has options to lock your STL dragging to discrete increments:
  • Grid Snap OFF
  • Grid Snap 1.0mm
  • Grid Snap 5mm
  • Grid Snap 10mm
  • Grid Snap 25mm
• Visualization Settings has options to configure your visualization:
  • Show Print Bed
  • Set Print Bed Color
    • Set Background Color
    • Set Selected Object Color
    • Copy Image to Clipboard

Beneath the 3D View main window is a text window, where certain events are displayed. Right-clicking on this text window provides the following options:

• Copy
• Paste
• Cut
• Clear All Text
• Show/Hide ToolBar
• Show/Hide Event Log Settings Box, which will allow you to specify where and in what format log files are spooled. Double-clicking in the settings area returns the standard text window.
• Save Highlighted Text to File
• Save to default File... (location/name)
• Start File Stream to... (location/name)
• Stop File Stream to... (location/name)
• Apply Settings As Power On Default
• MoveTextToBuffer

Control

The Control (formerly Manual Control) tab (shown to the right) has Top and Bottom halves; each half has multiple side tabs. The first tab displayed, the Manual tab (Top) and the Head CTRL tab (Bottom) are the primary tabs. The other Top Tabs (Advanced, Table, and Debug) are only used in testing at present. The other Bottom tab (Temp Plot) is used by some users.

Motion

The Motion side tab, in the top portion of the Control tab, deals with manually directing the X/Y/Z motion of the printer, and manually setting the Z-Zero position.

• The Positioning Data will display the current relative and absolute positioning. This is used when calibrating the head offsets.
• The Tan X arrows will move the bed by the displayed distance, in the displayed direction.
• The Blue Y arrows will move the yoke by the displayed distance, in the displayed direction.
• The Green Z arrows will move the bed by the displayed distance, in the displayed direction. Note, this will not be allowed to exceed the user-set (or default) Z-Zero setting. See the Z Calibrate entry, below.
• The Home X-Y button will send the yoke and bed to the home positions.
• The Park XY button will send the yoke and bed to your preconfigured Park location. Note, this merely adds a set amount to your current location, and the unit should always be homed (Home X-Y) before being Parked.
• The Fine Move button will change the X/Y/Z arrows to use smaller distances for fine tuning offsets.
• The Z^^0 button will send the bed up to the user-set (or default) Z-Zero setting. See the Z Calibrate entry, below.
• The Enable Z Calibrate button will enable the Yellow SET Z arrow, below. This should only be enabled when actually setting the Z-Zero.
• The Yellow SET Z arrow will allow the bed to move up past the current Z-Zero position, AND it will set a new Z-Zero position at the Z location to which you move the bed.

Advanced

The Advanced tab has some test and experimental settings, and should not be used.

Table

The Table tab has some legacy information which is now properly viewed on each head, and should not be used. See #Head_CTRL

Debug

The Debug tab has some test and experimental settings we use during production, and should not be used.

Head CTRL

The Head CTRL side tab, in the bottom portion of the Control tab, deals with manually setting or changing the data on the modular heads. These shots are taken from the display of an MK1-250 head:

• The numbers shown in blue represent the current Temperature in degrees Celsius. If this shows XXX or a very unrealistic temperature, it means your head either has no RTD (thermal reading device), or is set as the wrong type of RTD. The temperature also acts as a 'first' (2.855 and earlier) or 'previous' (newer versions) page button, depending on the release.
• To the right of the temperature is a Right-arrow, which will allow you to page through the data on the head.
• MK1 is the first page displayed on a head flashed as an MK1-250.
  • The first box is the Temperature box, which when not engaged, will show as green, displaying 0 degrees with an 'OFF' icon; and when engaged will show as yellow, displaying the default temperature with an 'ON' icon.
  • The second box is the RUN box, which, when not engaged, will show as green, displaying the word 'RUN' and a grey motor icon; and when engaged will show as yellow, displaying the default manual speed (typically 500 pulses per second), and arrows on the motor icon.
  • The third box is the FAN (or, on some heads, crosslink) box, which when not engaged will show as green, displaying the word 'OFF' and a fan icon; and when engaged will show as yellow, displaying the duty cycle of the fan (or LEDs), and a circle around the fan blades.
• Material is the second page dipslayed.
  • The first item will show 'ABS>235' or some other setting (including 'CUSTOM'), indicating the Default Material and temperature selected.
  • The second item will show what Color the temperature plot will render for this head.
  • The third item will display the presently set Nozzle Diameter for the head. 'It is critical for proper flow calculations that this number is accurate.'
  • The fourth item will display the default Layer Thickness in mm. This will later be overwritten by gcode.
• Temp Info is the third page.
  • Print Temp shows the default temperature to which the head will be set, should you manually turn it on. On print jobs, this should be overwritten by gcode.
  • PwrFactor should normally be set to 100 percent.
  • MIN and MAX should list the safe operating range of the head as programmed.
• OverRides is the fourth page.
  • Pulses/nl should actually be 'Pulses per Ten Nanoliters' by definition; this defines how many pulses to the motor will advance ten nl of material. 'It is critical for proper flow calculations that this number is accurate.' Unless you are using oversized or undersized filament, you should not have to adjust these numbers.
  • The Clone Head button will cycle through options to clone (duplicate the work of) any of the other three heads, as well as a 'Clone Off' mode. This allows multiple heads to simultaneously execute gcode written for a single head.
  • The Material Flow Rate Multiplier' allows for an easy, LIVE, percentage-based increase or decrease to the flow calculations. 1.000 is the default; 1.05 would generate 5% more flow.
• Prime is the fifth page. We define a Prime as an advance of material whenever transitioning from a non-printing move to a printing move. It can be customized for your particular material as follows:
  • Steps means how many steps or pulses the feed motor will be advanced during a Prime move.
  • The RATE at which the Prime will occur should normally be 10,000 (pulses per second).
  • The Dwell Time in milliseconds indicates how long after the Prime has begun before the flow rate of the next move should be engaged.
  • # Primes After Tool change allows for multiple cycles of Priming after this tool is reactivated by a tool change command.
• UnPrime is the sixth page. We define an UnPrime as a retract of material whenever transitioning from a printing move to a non-printing move. It can be customized for your particular material as follows:
  • Steps means how many steps or pulses the feed motor will be retracted during an unPrime move.
  • The RATE at which the UnPrime will occur should normally be 10,000 (pulses per second).
  • The Dwell Time in milliseconds indicates how long after the UnPrime has begun before the flow rate of the next move should be engaged; as the following flow rate is zero (for the non-printing move), this number is immaterial.
  • # Unprimes B4 Tool change allows for multiple cycles of UnPriming before this tool is temporarily deactivated by a tool change command.
• offsets is the seventh page. This is where we can set a Master head (for cloning), as well as set the tool offsets for heads which work cooperatively on the same print. This can be on different stls which print together, as well as support material from another head.
  • Setup As Master will home the bed and yoke, and set the selected head as the Master head for potential Clone heads.
  • X is where you can set or read the X offset in mm for a Clone head from the Master head.
  • Y is where you can set or read the Y offset in mm for a Clone head from the Master head.
  • Z is where you can set or read the Z offset in mm for a Clone head from the Master head. In all cases using print heads only, this should always be zero. The Z offset is used for the milling and lasing tools.
  • GOTO X/Y will send the head to its offesets.
  • Grab will grab the currently displayed offsets for this head.
• Head Info is the eighth page.
  • Model shows with what model choice the current head is programmed
  • RTD Type shows what RTD Lookup tables should be used. This should be '1Meg' for older heads and '1k PLAT_RTD' for newer (Dec 2015 and later) heads.
  • Motor Current should be set to High
  • Step Mode' should be set to Sixteenth
• Soap String is the ninth and final page, and it is from here that you can store or discard any changes you've made.
  • Right-clicking on the Flash button will allow you to flash the displayed values to the head as new defaults going forward
  • The Soaper Ref data is sometimes helpful in debugging issues
  • The Reset button will re-read data from the head, discarding any change you've made
  • The READ button will display the device type, hardware and software versions, and key data from the head.

Temp Plot

The Temp Plot side tab, in the bottom portion of the Control tab, allows users to view heating and cooling data. Right-clicking on the plot area will give a menu allowing for various options, including saving the data, opening previously saved data, and toggling on/off set points, actual temperatures, and duty cycles.

Pictures

asdf

Web Browser

Since the Repetrel interface takes up the entire tablet screen, there is a built-in web browser to allow reference or other pages to be loaded.

Aux Editor

The Aux Editor tab provides numerous functions:

• Print GCode is where selected messages from the slicing log are displayed, including any errors.
• AUX EDITOR is a workplace where you can paste, edit, and copy gcode or other text.
• G-Code Dictionary lists our G- and M- Codes, with examples and descriptions. This file is also readable by opening C:repetreldataG-Code dictionary.csv in any spreadsheet or CSV editor.
• snapped picture is where the latest image captured through the Camera tab or an M790 is displayed.

Help

This is where any videos or PDFs selected from the HELP menu will be displayed.

Slic3r

The Slic3r tab is where the Slic3r interface will be loaded, either for editing recipes or configuring multi-stl, multi-head prints.

Programs

This is where the paths to various programs are stored, so that external calls from Repetrel may be made.

Right Side Area

The content of the Right Side Area is dynamic, changing depending on which of the Right Side Tabs you have selected:

Project Composer, Upper

The top of the Project Composer tab has a menu; the middle has a project tree view on the left and a set of tabs on the right, and the bottom has a set of side tabs, which we will visit in more depth below.

OffSets

The Offsets tab allows the user to:

• Position (Offsets zone) the selected model in the X, Y, or Z axis.
• Scale the selected model with the aspect ration maintained (default), or individually along the X, Y, or Z axis.
• Rotate the selected model about the X, Y, or Z axis.

Note:

• The mm button will toggle the scale between 0 and 24.5, for easy switching between inches and millimeters.
• The target button will roughly center the 0,0 point of the model on the bed, with the lowest point flush to the bed.
• The down arrow button will realign the object so that the lowest point is flush to the bed.
• The lock XYZ button will ensure that scaling is applied equally to all axes.
• The 15 Deg button indicates that the + and - buttons will increment the rotation by 15 degrees with each click.
• The 'double up' and 'double down' arrows affect the selected object's positioning in the highlighted axis.
• All of the up/down arrows next to numbers will increment that value by one with each click.

Slicer

The Slicer tab is where we select the recipes with which to slice the model, or convert it into layers of gcode. It also has an 'Edit Recipes' button, which launches the recipe configuration tool.

• The Edit Recipes button will launch the Slic3r configuration tool, where recipes can be viewed, edited, and saved.
• The Save As Default button will make the currently displayed recipes defaults for the interface.
• The Print: dropdown menu is used to select the Print recipe, which defines the physical placement of material, including: the number of solid top and bottom layers and perimeters in the XY plane; the infill pattern and density; the print speed; which heads do which portions of the print (if slicing for multiple heads); and the extrusion width (how far apart the paths should be centered - normally the nozzle diameter plus 10%; and other parameters.
• The drill-laser recipe box allows the user to select a series of saved parameters for converting files to gcode for a laser or spindle tool; this is superceded by the Prams tab.

GCODE

This is where the actual gcode file currently selected in the tree view is displayed, and can be edited.

Note that when a job is started, this gcode is coped to a protected location, and any changes made during a print will not affect the present print, but will affect future prints. These changes are not automatically saved to disk, so please do so manually (right click and select a file name and location) if you want to save any changes.

Also, you can right-click in the gcode window and insert modifications at the point of the cursor (like 'change fan speed to...'), as well as clicking on the Edit menu and selecting options including inserting a raft and making a tool change.

If multiple gcodes are open in the tree view, this will display the one highlighted (in green) in the tree view. If multiple gcodes are in the tree view at the start of the job, they will be executed in the order displayed.

Prams

The Prams tab allows the user to customize the parameters used to convert a simple dxf file into gcode for the laser or spindle tool.

• Under the word Parameters is a dropdown box for selecting the type of tool for which we are slicing.
• The Head# box allows the user to select which head (tool position) will be executing this gcode.
• Auto Drill Code is presently disabled.
• ZUp controls how much distance should be introduced for non-printing moves (so the bit does not drag through material which is to remain during 'non-printing' (or 'non-milling') moves.
• ZDown is presently unused.
• Feed Rate is the linear travel speed in the XY plane (just like when printing) in mm/min.
• Diameter is the diameter of the bit being used. This is needed so that positioning will be offset, allowing the edge of the tool to remove the proper amount of material.
• %Power is the percent of full power at which the drill or laser should operate.
• Tool Change XYZ specifies the movement during tool changes.

GCODE Visual

Unused in the current release.

MISC

Unused in the current release.

Raw Text

This is where Drill/Mill gcode is temporarily written. These contents are used with the Zebra Print function.

The Raw Text window shouldn't list any starting or ending gcode, as this will be repeated on each Zebra Print layer.

Zebra Prints

This takes one layer of gcode and generates a multi-layer gcode file, repeating the current pattern (displayed in the Raw Text tab) in the number of cycles the user configures.

• Create Extrusion from Raw Text will use the parameters displayed to generate a multi-layer print from your single layer gcode in the Raw Text window.
• RT Code is always enabled.
• The Head 1 number determines how many layers from this head per cycle.
• The Head 2 number determines how many layers from this head per cycle.
• The Head 3 number determines how many layers from this head per cycle.
• The Head 4 number determines how many layers from this head per cycle.
• The # Zebra Cycles number determines how many cycles of the above pattern will be repeated.
• The Zebra Layer Height number indicates the layer thickness of all layers.
• The Lead In X Start is the X-axis offset for positioning the gcode.
• The Lead In Y Start is the Y-axis offset for positioning the gcode.
• The Circle Edge X Start ...
• The Circle G2 Radius ...

Pick_Place

Unused in the current release.

Fixture Helper

Unused in the current release.

G54-59

Unused in the current release.

Project Composer, Lower

The lower area of the Project Composer tab has sub-tabs, providing the following functionality:

FIND

This tab houses tools for manipulating and searching your gcode file.

• The upper text box can hold a search string. Note that GCode is case sensitive, and all commands must be upper case.
• The Find button, with a house icon and the word Find, will search for the first instance of the search string, starting at the home (beginning) of the file presently selected.
• The Previous Layer button, with the text Z< and a magnifying glass icon, will scroll up from the current cursor position to the previous layer announcement. Note: not working on Repetrel v2x.
• The Next Layer button, with a magnifying glass icon and the text Z<, will scroll down from the current cursor position to the next layer announcement.
• The Search Backward button, with a magnifying glass icon and the text <<, will search backward from the current cursor position for the string in the search box. Note: not working on Repetrel v2x.
• The Search Forward button, with a magnifying glass icon and the text <<, will search Forward from the current cursor position for the string in the search box.
• The lower text box can hold a replace string.
• The Replace button will replace the currently highlighted text with the string in the lower text box. Note: not working on Repetrel v2x.
• The Previous Toolchange button, with the text T< and a magnifying glass icon, will scroll up from the current cursor position to the previous toolchange. Note: not working on Repetrel v2x.
• The Next Toolchange button, with a magnifying glass icon and the text >T, will scroll down from the current cursor position to the next toolchange.
• The Match Case button will toggle the search function between being case sensitive (when the button is outlined in blue) and not case sensitive (the default).
• The Replace All button will replace all occurrences of the string in the upper box with the string in the lower box. Note: not working on Repetrel v2x.

VIEW

This tab houses tools for viewing the rendering of printing moves in your gcode file.

• The GO TO LAYER << IN GCODE button will send you to the layer change announcement line in your gcode file.
• The Move PrintBed button will move the print bed to the Z position for the layer presently displayed.
• The Show Single Layer button will display one layer at a time in the gcode rendering.
• When Show Single Layer is enabled, the < button will display the previous layer in the gcode rendering, allowing you to scroll backward, layer by layer.
• When Show Single Layer is enabled, the > button will display the next layer in the gcode rendering, allowing you to scroll forward, layer by layer.
• The Layer Display Range slider allows you to display a subset of layer (including a single layer) of the gcode rendering.

TEXT

This tab houses the controls for creating text objects, primarily for use with the laser and spindle tool heads. This tool creates the pathing to outline each character.

• The first text box is where you enter the text for which you want tool paths generated.
• The Font, Serial#, SMS, and Cmd options change the configuration of the text generator for different functions:
  • The Font button allows...
  • The Serial# button allows for the creation of sequential serial numbers.
  • The SMS button allows...
  • The Cmd button allows...
• The second text box is...
• The Create button executes the configuration as detailed by the other options.
• The Width button allows the text outlining to be wider.
• The <Line> Space button allows adjustment of vertical line spacing.
• The OffSET ONLY button...
• The Save button saves...

G0-G1

This tab allows you to post-process the selected gcode file.

• When clicked, the Set All G1 Speed To > button will change all G1 moves to the new value displayed to the right.
• The G1 Rapid Feed Rate number shown is the upper limit on which G1 moves will be modified when the Set All G1 Speed To > button is clicked.
• When clicked, the Set G1 Speed from > this Layer forward > button will limit which G1 moves will be modified from this layer (shown to the right) forward.
• The 'Auto Prep Gcode button will post-process the gcode to add a non-zero E value to every non-printing G1 move of less than 1.1mm. This eliminates unnecessary retract/advance cycles, and gives a smoother finish.

Copies

This tab is still in development and would allow for multiple copies to be printed, either one at a time, or layer by layer across all copies.

HELPER

This tab is still in development and will allow for the automatic generation of gcode to create rafts, dams, and scaffolds to enhance printing.

EZ Print

This tab allows for easy printing of simple models with default recipes, or repeating the last print.

Comm Link

asdf

Camera

Aquarius Std S20 S63 Driver Download For Windows 10

asdf

Live Video

Capture Picture

Live Canny

TabPage4

TabPage5

3DVisualSettings

asdf

STL Visual Settings

GCODE Filament Colors / Materials